Weiss MadaJet Sheath MFR# 408SS

SKU #2525

Stainless steel sheath designed by Dr. Ronald Weiss for precise injections over the vas. (MFR# 408SS)

Availability: In stock

$31.00

Weiss Sheath for Madajet Vasectomy Anesthesia

  • Weiss Sheath for Madajet Vasectomy Anesthesia

 


Video: No-Needle Vasectomy - Explanation of & Technique and Maintenance.

Jet-injector technology has been around for decades. The evolution of the jet device over the years has allowed increased reliability, portability, and better patient acceptance. In the No-Needle Vasectomy technique, nothing except the anesthetic solution penetrates the scrotal skin. The result is a quick, safe, and  virtually pain free procedure. 

..

Dr. Ronald S Weiss demonstrates No Needle

 

 

 


The Basics of Owning a MadaJet Injector.

Few instruments available can perform the functions or provide the technical advantages of theMadaJet Injector. There are several important facts concerning the operation and care of the injector which are important to provide maximum benefits and minimize problems for the physician.

Much time and expense can be saved by performing the safety, cleaning and maintenance procedures properly. It is recommended that the injector be returned to the manufacturer for maintenance annually.

 Read Product Manual                  Read How to Maintain Your MadaJet

 

 


Using MadaCide-FD Germicidal Solution.

MadaCide-FD Germicidal Solution is a general purpose cleaner, deodorizer and disinfectant to be used where control of cross-contamination hazards is of prime importance. MadaCide-FD Germicidal Solution provides a novel way to eectively clean and disinfect hard, non-porous environmental surfaces. MadaCide-FD Germicidal Solution aids in the reduction of cross-contamination hazards. Easy to use; no mixing ordiluting, except for ultrasonic cleaning. Ready-to-use. 

Read MadaCide-FD Directions       

Read Materials Safety Data Sheet 

MadaJet Daily Maintenance Procedures 

Download Service Request Form 

 

At The Beginning of the Day

 

    1. Put 1-3cc of anesthetic solution or medicament to be used into the fill chamber.
  • Prime 2-3 times. Screw head onto body, cock and fire.
  • Place jet injector into holder.

 

 

At The End of the Day


    1. Unscrew head assembly and pour or spray approximately 3cc of Ready-To-Use MadaCide-FD* into glass fill chamber.
  • Flush out MadaCide-FD* by putting 2-3cc of distilled water into fill chamber.
  • Prime the injector, and then empty the flush water.

    *MadaCide-FD is only available in the continental United States. Comparable disinfectant solutions may be used where MadaCide-FD is not available.

 

N/A