Loop Tip Electrode

SKU #2203

Loop Tip Electrode. (MFR# 201-A) For use with Geiger Cautery Only.

Availability: In stock

$49.00

Loop Tip Electrode

  • Loop Tip Electrode

 


Benefits of the Geiger Thermal Cautery Unit

 

  • No unwanted tissue damage
  • Increased cost efficiency over disposable units
  • Ergonomic, heat-resistant handpiece design
  • Wide variety of available tips
  • Uses a heavy duty 24 gauge wire
  • No radio frequency interference with other office units
  • 1 year parts and labor warranty on the unit
  • Small & lightweight (3.75″ D × 6.5″ W × 2.75″ H, 4 lbs.)                                              .               

 Read "A Comparison of Cauterization Methods" Paper

 


What Methods of Vasal Occlusion Are Recommended in the AUA 2012 Vasectomy Guideline?

An occlusion method that involves cauterizing the lumen and interposing the vasal sheath has gained wide acceptance in recent years. In 2012, a document entitled "Vasectomy: AUA Guidline" compares this method with others.

 Read full article

No-needle anesthesia for vasectomy

 

 

Sterilization Instructions

The Cautery Handpiece and Cautery Electrode may be autoclaved according to the instructions below.

- Separate the electrode from the Handpiece prior to autoclaving and use aseptic procedures when handling and sterilizing both items. Use aseptic procedures when handling and sterilizing the handpiece/electrode.

- Wipe and remove all debris present on the handpiece/electrode. Place the handpiece/electrode in an autoclavable pouch or wrapped cloth.

- Steam sterilize for a period of 20 minutes at 250°F (121°C), or consult an appropriate nationally recognized standard for sterilizing medical instrumentation. Do not flash autoclave or exceed 250°F.

- Allow the handpiece/electrode to cool for 30 minutes prior to use. Inspect the handpiece/electrode after sterilization for damage. If the handpiece/electrode has deteriorated or cracked, or severe discoloration or damage has occurred, discard the handpiece/electrode.

CAUTION: Do not use liquid sterilizing solutions with the Geiger TCU or accessories, as the potential for material damage exists.

Geiger’s reusable electrodes have solid 1″ brass shanks and tips are made with 24 gauge platinum wire. These general purpose electrodes are supplied non-sterile, but may be autoclaved. They fit the handpieces for both the Geiger Model 150 and 100 cautery units. 90 day warranty.
N/A